When sourcing a replacement, the button, spindle or cable and flush valve should be treated as a connected set rather than assumed to be interchangeable across brands, since fixing centres, spindle diameters and cable lengths vary between manufacturers. Plumb2U stocks dual-flush buttons, spindles, cables and the flush valves they operate, at trade prices, so a plumber can source the whole linkage in one order rather than guessing which single part will solve a button that has stopped working properly. Checking the range at a plumbers merchants like Plumb2U before a job avoids a returned part that almost fits.
Available space inside and around the cistern also narrows the choice. A shallow cistern with limited depth may not give a bottom-entry valve enough room to seat correctly, while a side-entry valve needs clear wall space at the right height with no other fittings in the way.
Cable-actuated systems use a flexible cable in place of the rigid spindle, which allows the button to be positioned somewhere other than directly above the flush valve, useful on concealed cisterns and certain close-coupled designs where the lid mechanism does not line up with the valve beneath. The cable itself can stretch, kink or seize inside its outer sheath over time, and a button that has become stiff, or one that no longer springs back after use, usually points to the cable rather than the flush valve itself.
Get the wrong flush valve on a low-level system and the flush pipe will not seat properly, leading to leaks at the joint that only show up once the cistern has been refitted and the access panel closed up again. Get a close-coupled flush valve into a low-level tank and the outlet is simply too short to reach the flush pipe collar at all.
A siphon uses the physics of siphoning rather than a simple valve seal to move water from the cistern into the pan. Lifting the lever raises a plastic or rubber diaphragm inside the siphon body, which pushes a slug of water up and over a bend in the siphon tube, starting a siphoning action that then draws the rest of the cistern's contents down through the tube by suction until the water level drops low enough to break the siphon and stop the flush. This is why older cisterns produce that distinctive extended flush sound rather than the quicker valve-open, valve-close action of a modern flush valve.
See the details at Plumb2U Epsom.