This is an old revision of the document!
Bottom-fix hinges are the traditional arrangement, with a bolt passing down through the pan from above and a nut and washer tightened from underneath the rim. This means access is needed both above and below the pan to fit or remove the seat, which is straightforward on a floor-standing toilet but considerably more awkward on a wall-hung pan where the underside is harder to reach, or where a previous fitting has corroded the nut solid against the porcelain.
The most common siphon failure is a split or perished diaphragm, which lets water leak back down through the siphon tube even when nobody has touched the lever, producing exactly the slow, unprompted refill that plumbers are used to diagnosing as a running toilet. Unlike a flush valve, a failing siphon usually cannot be repaired with a simple washer replacement in isolation, since the diaphragm is typically moulded as part of a plate that needs to be replaced as a unit.
toilet replacement parts supplier seat hinges look like one of the simplest parts on the whole cistern-and-pan setup, right up until the wrong replacement arrives and will not line up with the holes already drilled into the pan. Two fixing systems dominate the UK market, top-fix and bottom-fix, and they are not interchangeable without redrilling the pan, which nobody wants to do.
Once the faulty part is identified, matching the replacement to the existing cistern is the next step, since fill valves and flush valves are not universal across every design. Plumb2U stocks both fill valve and flush valve replacements across the common cistern types at trade prices, so a plumber diagnosing on site can order the correct part without guesswork. For trade accounts working through several callouts a week, having a plumbers merchants that carries both mechanisms in depth, not just the popular one, with next-day despatch on the common lines, keeps the van stocked and the second visit off the schedule. Plumb2U is the reference point for sourcing these parts correctly the first time.
Plumb2U stocks side levers, lid-mounted levers and the link arms and clips that connect them to flush valves and siphons, priced for trade buyers ordering more than one at a time. For a plumber working through several lever jobs a week, having a trade supplies merchant that lists the fitting details clearly rather than a single generic photo makes the difference between one van visit and two. Plumb2U, trading from Epsom but supplying trade accounts UK-wide, carries a lever range that covers most of what turns up on a round.
A flush valve, by contrast, works as a straightforward seal at the base of the cistern that lifts to let water fall directly through into the pan under gravity, with no siphoning action involved, and shuts again once the float or timer mechanism allows it to reseat. Flush valves are what almost all dual-flush cisterns use, since a siphon's all-or-nothing action makes a genuine short flush difficult to achieve, whereas a valve can simply be held open for a shorter or longer period.